Port Management
Port Management includes Port Configuration, Port Mirroring, Bandwidth Control,
and Broadcast Storm Control.
Port Configuration
In Port Configuration, you can set and view the operation mode for each port.
Auto-Negotiation:
Enable and Disable. Being set as ‘Enable’, the Speed,
Duplex mode, Pause, Backpressure, TX Capability and Address Learning are
negotiated automatically. When you set it as ‘Disable’, you have to assign
those items manually.
Speed:
When the Auto-Negotiation column is set as Disable, users have to
set the connection speed to the ports ticked.
Duplex:
When the Auto-Negotiation column is set as Disable, users have to
set the connection mode in Half/Full to the ports ticked.
Pause:
Flow Control for connection at speed of 10/100Mbps in Full-duplex
mode.
Backpressure:
Flow Control for connection at speed of 10/100Mbps in
Half-duplex mode.
TX Capability:
When the Auto-Negotiation column is set as Disable, users
have to set this column as Enable or Disable.
Addr. Learning:
When the Auto-Negotiation column is set as Disable, users
have to set this column as Enable or Disable.
Select Port No.:
Tick the check boxes beside the port numbers being set.
Click Update to have the configuration take effect.
Current Status:
Displays current port status.
Setting Status:
Displays current.
Click
Update
to make the configuration effective.
17
Summary of Contents for GSW-2473
