LevelOne GSW-2473, User Manual

Page: 12 / 56

Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet nearby. The
surface where the user put the switch should be clean, smooth, level and sturdy.
Make sure there is enough clearance around the switch to allow attachment of
cables, power cord and allow air circulation.
Attaching Rubber Pads
A. Make sure mounting surface on the bottom of the switch is grease and dust
free.
B. Remove adhesive backing from your Rubber Pads.
C. Apply the Rubber Pads to each corner on the bottom of the switch. These
footpads can prevent the switch from shock/vibration.
Rack-mounted Installation
The 24-Port Fast Et 2-Port Gigabit Ethernet Combo Web Smart Switch
comes with a rack-mounted kit and can be mounted in an EIA standard size,
19-inch Rack. The switch can be placed in a wiring closet with other equipment.
Perform the following steps to rack mount the switch:
A. Position one bracket to align with the holes on one side of the switch and
secure it with the smaller bracket screws. Then attach the remaining bracket
to the other side of the switch.
B. After having attached mounting brackets, position the 24-Port Fast Et
2-Port Gigabit Ethernet Combo Web Smart Switch in the rack by lining up the
holes in the brackets with the appropriate holes on the rack. Secure the
switch to the rack with a screwdriver and the rack-mounting screws.
7