Appendix
10 /100BASE-TX Pin outs
With10 /100BASE-TX cable, pins 1 and 2 are used for transmitting data,
and pins 3 and 6 for receiving data.
RJ-45 Pin Assignments
Pin Number
Assignment
1 Tx+
2 Tx-
3 Rx+
6 Rx-
Note:
“+” and “-” signs represent the polarity of the wires that make up
each wire pair.
The table below shows the 10 / 100BASE-TX MDI and MDI-X port pin outs.
Pin MDI-X
Signal Name
MDI Signal Name
1
Receive Data plus (RD+)
Transmit Data plus (TD+)
2
Receive Data minus (RD-)
Transmit Data minus (TD-)
3
Transmit Data plus (TD+)
Receive Data plus (RD+)
6
Transmit Data minus (TD-)
Receive Data minus (RD-)
10
Summary of Contents for GSW-0504
Page 2: ......
Page 16: ...Cross over cables schematic 13...