5.2.4.
Configure Link-aggregation Port flow balance.
In the congiguration mode, plase configure AP flow balance as follow steps
：
Command
function
Switch(config)# link-aggregation
[
ap-id
] load-balance {mac | ip-mac | ip}
Configure AP flow balance,choose the way of
algorithm.
：
mac
：
According to the input packets’ source MAC
address to assign.
ip-mac
：
According to input packtes’ resource
packets’ MAC address to assign flow.
ip
：
According input packets resource IP address
to assign flow.
5.3. show Link-aggregation Port
In the privileged mode, please show the AP configuration as follow steps.
Command
Function
Switch# show link-aggregation
group [
ap-id
]
Show AP configuration
。
Switch#show link-aggregation group 1
Link Aggregation 1
Mode: Manual Description:
Load balance method: mac
Number of ports in total: 1
Number of ports attached: 1
Gi 0/1: DETACHED
Gi 0/3: ATTACHED
6. Configure VLAN
This section describles how to configure IEEE802.1Q VLAN
6.1. Summarize
VLAN is the abbreviation of Virtual Local Area Network
，
it is a logical net divided from a physical
network.This network corresponds to the second layer of the ISO mode. How to divide the VLAN is
not limited by the actual physical position of the network port.
的 划分不受网。
VLAN has the same
attribute with the common physical network. It is the same as the common LAN except that it
doesn’t have the limitation of physical position. The unicasting and broadcasting and multicasting in
the second layer transimit and spread in a VLAN,will not enter other VLAN.So if a host wants to