281
◆
Port Members
– The ports assigned to this VLAN.
WEB INTERFACE
1. To display VLAN members, click Monitor, VLANs, VLAN Membership.
2. Select a software module from the drop-down list on the right side of the page.
Displaying VLAN Port Status
Use the VLAN Port Status page to show the VLAN attributes of port members for all VLANs
configured by a selected software module, including PVID, VLAN aware, ingress filtering,
frame type, egress filtering, and UVID.
Refer to the preceding section for a description of the software modules that use VLAN
management services.
PATH
Monitor \ VLANs \ VLAN Port
Figure 144: Displayinging VLAN Port Status
PARAMETERS
These parameters are displayed:
◆
VLAN User
– A software module that uses VLAN management services to configure
VLAN membership and VLAN port settings such as the PVID or untagged VLAN ID. Refer
to the preceding section for a description of the software modules that use VLAN
management services.
◆
Port
– Port Identifier.
◆
PVID
– The native VLAN assigned to untagged frames entering this port.
◆
VLAN Aware
– Configures whether or not a port processes the VLAN ID in ingress frames.
(Default: Disabled)
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...