280
5.13. VLANs Member
Use the monitor pages for VLANs to display information about the port members of VLANs,
and the VLAN attributes assigned to each port.
Displaying VLAN Membership
Use the VLAN Membership Status page to display the current port members for all VLANs
configured by a selected software module.
PATH
Monitor \ VLANs \ VLAN Membership
Figure 143: Displaying VLAN Members
PARAMETERS
These parameters are displayed:
◆
VLAN User
– A software module that uses VLAN management services to configure
VLAN membership and VLAN port settings such as the PVID or untagged VLAN ID. This
switch supports the following VLAN user modules:
■ Static: Ports statically assigned to a VLAN through the CLI, Web or SNMP.
■ NAS: Provides port-based authentication, which involves communications between a
Supplicant, Authenticator, and an Authentication Server.
■ MVR: Eliminates the need to duplicate multicast traffic for subscribers in each VLAN.
Multicast traffic for all channels is sent only on a single (multicast) VLAN.
■ Voice VLAN: A VLAN configured specially for voice traffic typically originating from IP
phones.
■ MSTP: The 802.1s Multiple Spanning Tree protocol uses VLANs to create multiple
spanning trees in a network, which significantly improves network resource utilization while
maintaining a loop-free environment.
■ Combined: Shows information for all active user modules.
◆
VLAN ID
– A VLAN which has created by one of the software modules.
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...