16
show the PoE class and wattage for each port. PoE Time Scheduling can be configured for
ON/OFF in each port for 24-hour/7-days weekly basis. In addition, the keep-alive IP auto-
checking can be enabled to ping the connected powered IP device. It can reboot and reset
the power when the connected IP device fails to respond to the ping checking.
MULTICAST FILTERING
Specific multicast traffic can be assigned to its own VLAN to ensure that it does not interfere
with normal network traffic and to guarantee real-time delivery by setting the required
priority level for the designated VLAN. The switch uses IGMP Snooping and Query to
manage multicast group registration for IPv4 traffic, and MLD Snooping for IPv6 traffic. It
also supports Multicast VLAN Registration (MVR) which allows common multicast traffic,
such as television channels, to be transmitted across a single network-wide multicast VLAN
shared by hosts residing in other standard or private VLAN groups, while preserving
security and data isolation for normal traffic.
1.3. Reset Button & LED Indicators
The Reset button on the front panel can be used to reset the switch, and the Etherent
connections will restart again. Note that all the settings will remain unchanged.
The descriptions of LED indicators per port basis are as the following table:
Table 2: LED Status and Descriptions
LED
Status
Descriptions
CPU
ON
System is ready.
OFF
System is not ready.
PWR
ON
System power is on.
OFF
System power is off.
LAN
Green ON
LAN Port is in connection of 1000Mbps.
Yellow ON
LAN Port is in connection of 10/100Mbps.
Flashing
Data is transmitting or receiving
OFF
No Ethernet connection.
PoE
ON
Power over Ethernet is ON.
OFF
Power over Ethernet is OFF.
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...