LevelOne GEL-5261, User Manual

Page: 240 / 570

Chapter 12
| Security Measures
AAA (Authentication, Authorization and Accounting)
– 240 –
■
Confirm Authentication Key – Re-type the string entered in the previous
field to ensure no errors were made. The switch will not change the
encryption key if these two fields do not match.
◆
■
Global – Provides globally applicable settings.
■
Server Index – Specifies the index number of the server to be configured.
The switch currently supports only one server.
■
Server IP Address – Address of the server.
(A Server Index entry must be selected to display this item.)
■
Authentication Server TCP Port – Network (TCP) port of server
used for authentication messages. (Range: 1-65535; Default: 49)
■
Authentication Timeout – The number of seconds the switch waits for a
reply from the server before it resends the request.
(Range: 1-65535; Default: 5)
■
Authentication Retries – Number of times the switch tries to authenticate
logon access via the authentication server. (Range: 1-30; Default: 2)
■
Set Key – Mark this box to set or modify the encryption key.
■
Authentication Key – Encryption key used to authenticate logon access
for client. Enclose any string containing blank spaces in double quotes.
(Maximum length: 48 characters)
■
Confirm Authentication Key – Re-type the string entered in the previous
field to ensure no errors were made. The switch will not change the
encryption key if these two fields do not match.
Configure Group
◆ Server Type – Select RADIUS or server.
◆ Group Name - Defines a name for the RADIUS or server group.
(Range: 1-64 characters)
◆
Sequence at Priority - Specifies the server and sequence to use for the group.
(Range: 1-5 for RADIUS; 1 for TACACS)
When specifying the priority sequence for a sever, the server index must
already be defined (see
“Configuring Local/Remote Logon Authentication” on
page 237 ).