LevelOne GEL-5261, User Manual

Page: 110 / 570

Chapter 4
| Interface Configuration
Port Configuration
– 110 –
To show ingress or egress traffic statistics for a sample entry:
1.
Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
2.
Select Show Details from the Action menu.
3.
Select Input Previous Entry or Output Previous Entry from the options for
Mode.
4.
Select an interface from the Port or Trunk list.
5.
Select an sampling entry from the Name list.
Figure 39: Showing Ingress Statistics for a History Sample
Displaying
Transceiver Data
Use the Interface > Port > Transceiver page to display identifying information, and
operational for optical transceivers which support Digital Diagnostic Monitoring
(DDM).
Parameters
These parameters are displayed:
◆ Port – Port number. (Range: 49-52)
◆ General – Information on connector type and vendor-related parameters.
◆ DDM Information – Information on temperature, supply voltage, laser bias
current, laser power, and received optical power.
The switch can display diagnostic information for SFP modules which support
the SFF-8472 Specification for Diagnostic Monitoring Interface for Optical
Transceivers. This information allows administrators to remotely diagnose