LevelOne GEL-2870, Installation Manual, Page: 27 / 74

C
HAPTER
1
| Introduction
Description of Hardware
– 27 –
P
OWER
S
UPPLY
S
OCKET
There is one power socket on the rear panel of the switch. The standard power
socket is for the AC power cord.
Figure 3: Power Supply Socket
DIAG On Green The system diagnostic test has completed
successfully.
On Yellow The system diagnostic test is in progress.
Flashing Yellow The system diagnostic test has detected a fault.
Flashing Green and
Yellow
The system is booting up.
Table 3: System Status LEDs (Continued)
LED Condition Status
100-240V ~ 50-60Hz, 2A MAX