LevelOne GEL-1061, User Manual

Page: 42 / 500

Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 42 –
commands issued through the web interface. See “Configuring Interface Settings
for STA” on page 175 .
Note:
Users are automatically logged off of the HTTP server or HTTPS server if no
input is detected for 600 seconds.
Note:
Connection to the web interface is not supported for HTTPS using an IPv6
link local address.
Navigating the Web Browser Interface
To access the web-browser interface you must first enter a user name and
password. The administrator has Read/Write access to all configuration parameters
and statistics. The default user name and password for the administrator is “admin.”
The administrator has full access privileges to configure any parameters in the web
interface. The default user name and password for guest access is “guest.” The guest
only has read access for most configuration parameters. Refer to
“Configuring User
Accounts” on page 241 for more details.
Dashboard
When your web browser connects with the switch’s web agent, the Dashboard is
displayed as shown below. The Dashboard displays the main menu on the left side
of the screen. Switch Information, CPU Utilization, Switch Events, Memory
Utilization, Recent 5 Event Information, Port Utilization, Dynamic Address Count,
and LLDP Remote Device Port List are displayed on the right side. The main menu
links are used to navigate to other menus, and display configuration parameters
and statistics.
Figure 1: Dashboard