LevelOne GEL-1061, User Manual

Page: 232 / 500

Chapter 12
| Security Measures
AAA (Authentication, Authorization and Accounting)
– 232 –
■
Exec – Administrative accounting for local console, Telnet, or SSH
connections.
◆
Privilege Level – The CLI privilege levels (0-15). This parameter only applies to
Command accounting.
◆
Method Name – Specifies an accounting method for service requests. The
“default” methods are used for a requested service if no other methods have
been defined. (Range: 1-64 characters)
Note that the method name is only used to describe the accounting method
configured on the specified RADIUS or servers. No information is sent
to the servers about the method to use.
◆
Accounting Notice – Records user activity from log-in to log-off point.
◆
Server Group Name - Specifies the accounting server group. (Range: 1-64
characters)
The group names “radius” and “” specifies all configured RADIUS and
hosts (see
“Configuring Local/Remote Logon Authentication” on
page 225 ). Any other group name refers to a server group configured on the
Security > AAA > Server (Configure Group) page.
Configure Service
◆
Accounting Type – Specifies the service as 802.1X, Command or Exec as
described in the preceding section.
◆
802.1X
■
Method Name – Specifies a user defined accounting method to apply to
an interface. This method must be defined in the Configure Method page.
(Range: 1-64 characters)
◆
Command
■
Privilege Level – The CLI privilege levels (0-15).
■
Console Method Name – Specifies a user-defined method name to apply
to commands entered at the specified CLI privilege level through the
console interface.
■
VTY Method Name – Specifies a user-defined method name to apply to
commands entered at the specified CLI privilege level through Telnet or
SSH.
◆
Exec
■
Console Method Name – Specifies a user defined method name to apply
to console connections.