LevelOne Broadband Router User Guide
40
Checking your DHCP Server
If you already have a DHCP Server:
•
Check that the DHCP Server function in the LevelOne Broadband
Router is
Disabled
. This setting is on the
LAN Port
screen.
•
Check your DHCP Server, and ensure that:
•
IP Address
assigned to LevelOne Broadband Router (
Device
IP Address
, set on the
LAN Port
screen) is compatible with the
Address range used by the DHCP Server.
•
Network Mask
matches the value entered on the LevelOne
Broadband Router's
LAN Port
screen.
•
DNS IP Address
matches the value entered on the LevelOne
Broadband Router's
LAN Port
screen.
•
Gateway
is set correctly. This depends on whether or not you
have a router installed on your LAN, as shown by the following
table.
No
Router
Set the
Default Gateway Address
to the IP address
(
Device IP Address
, set on the
LAN Port
screen)
assigned to the LevelOne Broadband Router. The
default IP Address is 192.168.0.1.
Router
Do not change the
Default Gateway Address
. Instead,
the router must be configured as explained in
Chapter
6 - Routing
.
