LevelOne BOH-1200 Quick Installation Manual Download

Page: 1 / 4

- 1 -

BOH-1200

Outdoor Housing for Box Cameras w/ Infrared LEDs

Quick Installation Guide

H EC K YO U R PA C KAG E CO NT ENT S

The carton should contain the following items:

BOH-1200

Camera bracket

Screw kit

If any item is missing or damaged, please contact your local reseller for replacement.

Note: This installation should be completed by a qualified installer and should conform to all

local codes and regulations.

NTRO D UC TIO N

The BOH-1200 is constructed from sturdy die cast aluminum with environmental protection

rated to IP-66.

There is built-in fan and heater included. The fan operates when the temperature reaches over

℃

and stops once the temperature stabilizes at 25

℃

again.

The built-in heater begins operation once the temperature is under 15

℃

and stops once the

temperature is over 25

℃

again.

406mm(L) x 145mm (W) x 109mm (H)

Summary of Contents for BOH-1200

Page 1: ...d be completed by a qualified installer and should conform to all local codes and regulations INTRODUCTION The BOH 1200 is constructed from sturdy die cast aluminum with environmental protection rated...

Page 2: ...E screw Connect the bracket by screwing in the 4 mounting screws on the bottom side of the housing INSIDE THE HOUSING 1 2 5 3 4 1 Protective light shield prevents the IR LEDs from reflecting into the...

Page 3: ...Bracket A camera to Bracket B Again only tighten enough to hold in place while deciding on the final position Once the camera s final position has been decided tighten all screws Power Relay Board 4...

Page 4: ...an NOT operate simultaneously Please note the difference between positive and negative terminals when connecting power Default camera housing package don t include power adapter when use the optional...