DSS-1000 User Manual
99
However, in case DSS-1000 does not detect the DHCP connection, perform the following
procedures to obtain the IP address:
1.
On the
Setup
screen, click
Network
>
Network Connection
.
2.
On
Connection Type
, select
DHCP
.
3.
Leave the default
DNS Setting
as “
Auto
”.
4.
Click
Save
.
Configuring Port Mapping
By default, DSS-1000 port number is 80. To change this value, click
Network
>
Port Mapping
on the
Setup
screen. Click
Save
to apply and save the changes.
3.6 Configuring the Cameras
On the
Setup
screen, click
Camera
. The camera list table is displayed.
