Type overview and accessories
Leuze electronic GmbH + Co. KG
BPS 8
88
12
Type overview and accessories
12.1 Type overview: BPS 8
12.2 Type overview: Bar code tape
12.2.1 Standard bar code tapes
Leuze offers a wide selection of standardized bar code tapes.
• These are available in grid dimensions of 30 mm (BCB G30 ...) and 40 mm (BCB G40 ...).
• Standard tapes always begin with the tape value 0 and are available in length increments of 10 m in
lengths from 5 m/10 m up to 150 m/200 m.
• Standard tapes are available in heights of 47 mm and 25 mm.
• Standard tapes are printed below the bar code with the corresponding position value.
The tapes are wound and delivered on a core.
All available standard tapes are listed on the Leuze website under the respective, selected BPS product
under the "Accessories" heading.
12.2.2 Special tapes
Special tapes are produced according to customer specifications.
A special tape is characterized by the following features:
• The initial value as well as the final value of the tape (dependent on the BCB G30 ... or BCB G40 ...
grid dimension) according to customer specifications.
• Special tapes are printed below the bar code with the corresponding position value.
• Tape heights are available in millimeter increments in the range from 20 mm to 140 mm.
• The maximum tape length is 10,000 m, the maximum position value is 9999.99 m.
• Special tapes longer than 300 m are delivered wound on multiple rolls.
An entry wizard is available for special tapes on the Leuze website under the "BPS 8 - Accessories"
heading. The entry wizard provides support when entering the individual pieces of tape data and creates
a query or order form with the correct part number and type designation.
12.2.3 Twin tapes
Twin tapes are special tapes and are produced according to customer specifications.
Part no.
Type designation
Description
50104783
BPS 8 SM 102-01
Front beam exit, M12 connector,
presetting: binary protocol 1 with baud rate 57.6kBit/s
50104784
BPS 8 SM 100-01
Lateral beam exit, M12 connector,
presetting: binary protocol 1 with baud rate 57.6kBit/s
50104785
BPS 8 SM 102-02
Front beam exit, M12 connector,
binary protocol 2
50104786
BPS 8 SM 100-02
Lateral beam exit, M12 connector,
binary protocol 2
50104787
BPS 8 SM 102-03
Front beam exit, M12 connector,
binary protocol 3
50104788
BPS 8 SM 100-03
Lateral beam exit, M12 connector,
binary protocol 3
50106812
BPS 8 SM 102-04
Front beam exit, M12 connector,
binary protocol 4
50106813
BPS 8 SM 100-04
Lateral beam exit, M12 connector,
binary protocol 4
50107325
BPS 8 SM 102-05
Front beam exit, M12 connector,
presetting: binary protocol 1 with baud rate 19.2kBit/s
50107326
BPS 8 SM 100-05
Lateral beam exit, M12 connector,
presetting: binary protocol 1 with baud rate 19.2kBit/s
50137879
BPS 8 SM 102-10
Front beam exit, M12 connector,
presetting: binary protocol 6
