Leuze BCL34, Technical Description

Page: 32 / 102

Accessories / Order Designation
30 BCL 34 Leuze electronic
Table 6.1: Accessories / Order Designation
6.1.1 Modular Service Display MSD 1 101
The modular service display MSD 1 101 is used to display device messages or the data that
has been read.
• The device has a service interface in the form of a 9-pin sub-D connector (pin
assignment: 2=RxD, 3=TxD, 5=GND).
Transmission in the standard Leuze format 9600/8/Non/1 frame STX/…/CR/LF.
• Connection to the PC via null modem cable
•
All parameters of the BCL 34 are accessible via the service interface.
• Operating mode switch: service operation/standard operation
• Display
• Prerequisite for use: modular hood with integrated connectors MS 34 105
Attention!
If parameters are changed that can also be set via the PROFIBUS, they are overwritten with
the parameter setting defined in the PROFIBUS after PROFIBUS start-up. If device or mod-
ule parameters are to be changed permanently, they must be set in the PROFIBUS project.
Plug axial - socket axial
KB PB-1000-SBA 501 04096 PROFIBUS cable, M12 plug - M12 socket, 1m
KB PB-2000-SBA 501 04097 PROFIBUS cable, M12 plug - M12 socket, 2m
KB PB-5000-SBA 501 04098 PROFIBUS cable, M12 plug - M12 socket, 5m
KB PB-10000-SBA 501 04099 PROFIBUS cable, M12 plug - M12 socket, 10m
KB PB-15000-SBA 501 04100 PROFIBUS cable, M12 plug - M12 socket, 15m
KB PB-20000-SBA 501 04101 PROFIBUS cable, M12 plug - M12 socket, 20m
KB PB-25000-SBA 501 04174 PROFIBUS cable, M12 plug - M12 socket, 25m
KB PB-30000-SBA 501 04173 PROFIBUS cable, M12 plug - M12 socket, 30m
Designation Order No. Short Description