manualshive.com logo in svg

Leuze BCL 8, Original Operating Instructions

Share
Download
Leuze BCL 8 Original Operating Instructions Download Page 49

Configuration and diagnostics software - Sensor Studio

Leuze electronic GmbH + Co. KG

BCL 8

49

Figure 9.16: Firmware Reload

Load the file with the new firmware (

*.mot

) to the Firmware Reload tool. 

Click the  [Browse] button. 

A dialog for selecting the firmware file (

*.mot

) opens.

Once the firmware file is loaded to the 

Firmware Reload

 tool, click on the [Start Reload] button to load 

the new firmware into the device.
• The device is connected via the serial interface specified under Port.
• The 

Firmware Reload

 tool checks whether the new firmware is compatible with the device.

• If the new firmware is compatible, the firmware is automatically installed in the device.

• If the new firmware is not compatible with the device or is identical with the current firmware ver

-

sion, a dialog box for canceling or continuing the installation is displayed.

Summary of Contents for BCL 8
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands