Fast commissioning
Leuze electronic GmbH + Co. KG
BCL 208i
13
NOTICE
Setting the IP address to the Leuze default address
By reading in the configuration code during the initialization phase, the IP address and the sub-
net mask are set to the Leuze default.
IP address: 192.168.60.101
Subnet mask: 255.255.255.0
192.168.060.101
Operating the bar code reader
After connecting a supply voltage of +18 … 30 V DC to the switching input, a read process is activated. In
the standard setting, all common code types for decoding are released. Only the 2/5 Interleaved code type
is limited to 10 digits of code content.
If a code is moved through the reading field, the code content is decoded and forwarded to the superior
system (PLC/PC) via Ethernet.
3.7
Bar code reading
Ä
Test the device with the following bar code in format 2/5 Interleaved. The bar code module here is 0.5.
Modul 0,5
6677889900
The PWR LED goes off briefly and then turns green again. Simultaneously, the read information is for-
warded to the superior system (PLC/PC) via the Ethernet.
Ä
Check the incoming data of the bar code information.
Alternatively, you can use a switching input for read activation (switching signal of a photoelectric sensor or
24 V DC switching signal).
