Commissioning and configuration
Leuze electronic GmbH + Co. KG
BCL 308
i
82
10
Commissioning and configuration
This chapter describes basic configuration steps which you can carry out via the webConfig tool.
Via the webConfig tool
The most convenient way to configure the BCL 308
i
is via the webConfig tool. To use the webConfig tool,
you need to establish a USB connection between the BCL 308
i
and a PC/laptop.
10.1 Measures to be performed prior to the initial commissioning
Before commissioning, familiarize yourself with the operation and configuration of the BCL 308
i
.
Before connecting the supply voltage, recheck all connections and ensure that they have been properly
made.
The description of the electrical connections can be found in Chapter 7.
ATTENTION LASER!
Observe the safety notices in Chapter 2!
NOTE
Notes on the use of the webConfig tool can be found in Chapter 9 "Leuze webConfig tool" on