Electrical connection
Leuze electronic GmbH + Co. KG
BCL 308
i
62
Figure 7.3: BCL 308
i
- ME 308 103 connection hood with M12 connection cables
7.2.3 ME 308 104 connection hood with M8/M12 connection cables
The ME 308 104 connector hood features three connection cables with M12 connectors, a connection
cable with M8 connectors and a Mini
-
B type USB socket as service interface. Parameter memory is inte
-
grated into the ME 308 104 which temporarily stores the settings of the BCL 308
i
in the case of replace
-
ment and transmits them to a new device.
NOTE
The shielding connection is done via the M12 connector housing.
NOTE
The integrated parameter memory for the simple replacement of the BCL 308
i
is located in the
ME 308 103. In the integrated parameter memory, both the settings and the network address are
saved and transmitted to a new device.
NOTE
In the case of Ethernet line topology, the network is interrupted when the BCL 308
i
is removed
from the ME 308 103.
NOTE
Dimensioned drawing on see chapter 5.3.5 "Dimensioned drawings of MS 3xx / ME 3xx /
MK 3xx connection hoods" on Page 40.
PWR
SWIO_2
SWIO_1
3
2
1
4
5
GNDIN
VIN
FE
Seal Plug
not connected
SERVICE
2
1
3 4 5
GND
D
I
B
V
-
D
+
D
HOST / BUS IN
TD+ 1
2
3
4
RD+
RD-
TD-
BUS OUT
TD+ 1
2
3
4
RD+
RD-
TD-
Mini-B USB socket
(behind protective cap)
M12 connector
(A-coded)
Ethernet 0
M12 socket
(D-coded)
Ethernet 1
M12 socket
(D-coded)
Connection hood
ME 308 103
Ethernet 1
LED (split, two-colored):
ACT1 / LINK1
Ethernet 0
LED (split, two-colored):
ACT0 / LINK0
①
②
③
④
⑤
Dummy plug
①
②
③
④
⑤
