Fast commissioning / operating principle
Leuze electronic GmbH + Co. KG
BCL 308
i
22
3.7
Bar code reading
To test, you can use the following bar code in the 2/5 Interleaved format. The bar code module here is 0.5:
Provided your BCL 308
i
model has a display, the read information appears on this display. The PWR LED
goes off briefly and then turns green again. Simultaneously, the read information is forwarded to the supe
-
rior system (PLC/PC) via the Ethernet.
Please check the incoming data of the bar code information there.
Alternatively, you can use a switching input for read activation (switching signal of a photoelectric sensor
or 24 V DC switching signal).
Modul 0,5
6677889900