manualshive.com logo in svg

Leuze 50039447, Original Operating Instructions, Page: 53 / 58

Share
Download
Leuze 50039447 Original Operating Instructions Download Page 53

Installation

Leuze electronic GmbH + Co. KG

ODSL 30

51

6

Installation

6.1

Storage, transportation

Unpacking

Check the packaging content for any damage. If damage is found, notify the post office or shipping 

agent as well as the supplier.

Check the delivery contents using your order and the delivery papers:
• Delivered quantity
• Device type and model as indicated on the name plate
• Accessories
• Operating instructions

Save the original packaging for later storage or shipping.

If you have any questions concerning your shipment, please contact your supplier or your local Leuze 

sales office.

Observe the applicable local regulations when disposing of the packaging materials.

6.2

Mounting

View through a recess

Figure 6.1: View through a recess
If the ODSL 30 has to be installed behind a cover, the recess has to have at least the size of the optical 

glass cover. Otherwise, a correct measurement is not possible or can not be guaranteed. 

NOTE 

The mounting device BT 30 is already included in the scope of delivery of the ODSL 30.

Summary of Contents for 50039447



























































Reviews:

No comments