Description ODSL 30
Leuze electronic GmbH + Co. KG
ODSL 30
41
3.8.3 Changing the display resolution
On delivery, the measurement resolution of the ODSL 30 (display) is 1mm. In the Advanced mode, the
resolution of the display can be increased to 0.1mm by configuring with the membrane keyboard and
display:
Applic. Param.
->
Disp. Resolution 0.1mm
.
If you would like to transmit measurement data with a resolution of 0.1mm using the ODSL 30/D... with
serial interface, this can be parameterized at a different location (see see chapter 3.4.3).
For the ODSL 30/V…, the measurement range is to be restricted by appropriately configuring the analog
output.
The configuration of a resolution of 0.1mm is useful when performing measurements on objects with high
diffuse reflection and when the measurement data are processed further (e.g. averaging).
NOTE
This menu item refers only to the display. Changing this parameter has no direct effect on the
output at the serial or analog interfaces
