MSIsafesoft configuration software
Leuze electronic
MSI 100/200
75
9
MSIsafesoft configuration software
9.1
Installing software
Installation
The installation routine for the configuration software includes the installation of the driver for
the USB interface. The driver enables communication between the PC and the modules of the
MSI 100/200 system.
Proceed as follows:
1.
If you have downloaded the configuration software:
Extract the downloaded file and start the installation program (setup file).
If you purchased the configuration software on CD:
Insert the CD in the drive. A menu opens automatically. Start the installation program via
menu item "Install software".
2. Select the desired language for the installation routine.
The installation program now guides you through the installation step by step.
3. Follow the instructions on the screen.
Once MSIsafesoft is installed, you will be prompted to install the drivers for the safety module.
4. Follow the instructions on the screen.
5. In the Windows dialog box for driver installation, select "Install the software automatically
(recommended)".
Finally, a message appears indicating that the configuration software and drivers for the safety
module have been fully installed.
To ensure that the safety modules are automatically and correctly detected by the configu-
ration software, the software must be fully installed
before
the device is connected to the PC
the first time.
If you have deactivated the auto start option on your computer, open the "MSIsafesoft" folder
on the CD-ROM and execute the setup file.
This selection also sets the language for the MSIsafesoft user interface, which is set when
the software is started for the first time.
