Extended configuration – Leuze electronic webConfig tool
Leuze electronic
LSIS 472i
37
Figure 9.9:
BLOB prefiltering
dialog
Area
attribute: adjust the NOMINAL limit values if the geometry of the marking has changed.
Shape factor
attribute: adjust the NOMINAL limit values if the geometry of the marking has changed.
Centroid X
,
Centroid Y
attributes: the limits of the centroid values must not be changed.
9.3.8 Configuring the measurement
Select
CONFIGURATION > PROGRAMS
.
Select the active check program (
Rack Near
or
Rack Far
).
Select
CONFIGURATION > PROGRAM > Tools > Measurement > Testing
.
The
Measurement - Testing
dialog is displayed.
Figure 9.10:
Measurement - Testing
dialog
Define the limits for the measurement.
