Display and control panel
Leuze electronic
LSIS 4xx
i
48
TNT
35/7-2
4
V
7.4
Operation
Shown here is an example describing important operating procedures in detail.
Parameter enabling
During normal operation parameters can only be viewed. If parameters need to be changed,
the
ON
menu item in the
Parameter enabling
menu must be activated. To do this proceed
as follows:
Parameter
Parameter handling
Display settings
Program selection
Ethernet
In the Parameter menu, use the
buttons to select the
Parameter handling
menu item.
Press the enter button to enter the
Parameter handling
menu.
Parameter handling
o Parameter enable
Parameters to default
In the Parameter handling menu, use the
buttons to
select the
Parameter enable
menu item.
Press the enter button to enter the
Parameter enable
menu.
Parameter enable
OFF
o ON
Standard ----- Unit
OFF | |
In the Parameter enable menu, use the
buttons to
select the
ON
menu item.
Press the enter button to switch on parameter enabling.
Parameter enable
OFF
O ON
Standard ----- Unit
OFF | |
The PWR LED lights up orange. You can now set
individual parameters via the display.
Press the ESC button twice to return to the main menu.
ESC
ESC
