manualshive.com logo in svg

Leuze electronic LSIS 222, Technical Description, Page: 46 / 95

Share
Download
Leuze electronic LSIS 222 Technical Description Download Page 46

Configuration using configuration codes

44

Technical description LSIS 22x

Leuze electronic

7.3.5

Reading codes on LED displays (mobile phone read mode)

The decoder of theLSIS 22x can be optimized to read codes on the display of mobile
devices such as smartphones or on other LED displays with reflective surfaces. If this
option is selected, printed codes may be decoded at a slightly reduced reading speed.

By reading in one of the following configuration codes, the 

mobile phone read mode

option in the 

manual trigger mode

 or 

streaming presentation mode

 trigger mode is

switched on. 

To switch off this option, please read in the configuration code for the 

manual/serial

trigger mode

 in the 

normal

 or 

enhanced

 variant (see figure 7.6)

Figure 7.18: Configuration codes for switching-on the mobile phone read mode option

Mobile phone read - manual trigger mode

Mobile phone read - streaming presentation mode

Summary of Contents for LSIS 222
































































































Reviews:

No comments