Leuze electronic IPS 208i, Original Operating Instructions

Page: 56 / 74

Interfaces – Communication
Leuze electronic IPS 208i 56
Program changeover
Command ’GAI=<xxx>’
Description The command activates changeover to the desired program.
Parameter ’ xxx ’
The program number (ID) must be entered as a 3-digit number, e.g., '001'.
Acknowledgment ’ GS=<bb> ’
bb The following values are defined
’00’ Positive answer
’01’ Syntax Error
’02’ Wrong parameter
’03’ Wrong operating mode
’04’ Other error
10.1.3 Online commands for system control
Activate positioning
Command ’+’
Description The command activates configured positioning.
Parameter None
Acknowledgment None
Deactivate positioning
Command ’-’
Description The command deactivates configured positioning.
Parameter None
Acknowledgment None
10.2 XML-based communication
You can send commands for control and configuration directly to the device via XML-based communica-
tion.
• The device must be connected to a computer (host) via the Ethernet interface (see chapter 8.4.4 "Eth-
ernet host communication").
• The device is designed as an XML server and communicates on port 10004.
You can find detailed information on XML-based communication on the Leuze home page:
www.leuze.com
• Enter the type designation or part number of the device as the search term.
• You can find the information on the Downloads tab.