Commissioning – Leuze electronic webConfig tool
Leuze electronic
DCR 202i
43
9
Commissioning – Leuze electronic webConfig tool
The code readers of the DCR 200i series can be operated and configured via the Ethernet service inter
-
face with the integrated Leuze electronic webConfig tool.
With the webConfig tool, an operating-system independent, web-technology based, graphical user inter
-
face is available for configuring code readers of the DCR 200i series.
Through the use of HTTP as communication protocol and the client-side restriction to standard technolo
-
gies (HTML, JavaScript and AJAX), which are supported by all of today's popular, modern browsers, it is
possible to operate the webConfig tool on any Internet-enabled PC.
9.1
System requirements
To use the webConfig tool, you need a PC or laptop with the following specifications:
Table 9.1:
System requirements for the webConfig tool
9.2
Start webConfig tool
Prerequisite: IP address and subnet mask for the LAN connection with the device are set correctly.
Connect the operating voltage to the device.
Connect the HOST interface of the device to the PC.
The connection to the HOST interface of the device is made via the LAN port of the PC.
Start the webConfig tool via your PC's Internet browser with IP address 192.168.60.101 or with the IP
address set by you.
192.168.60.101 is the standard Leuze electronic IP address for communication with code readers of the
DCR 200i series.
The PC displays the webConfig start page with the current process information in the
Process
operating
mode:
• Current image of the code reader
• Current decoding result
• Brief history of the last decoding operations
• Statuses of the switching inputs/outputs
• Statistics counter
The webConfig tool is offered in the following languages:
German, English, French, Italian, Spanish, Chinese
Monitor
Min. resolution: 1280 x 800 pixels or higher
Internet browser
Internet Explorer version 9.0 or higher
Firefox version 30 or higher
Chrome version 40 or higher
Regularly update the operating system and the Internet browser. Install the current Windows
Service Packs.
The process information may be displayed with a time delay depending on the current process
-
ing speed.
