Starting up the device - Basic configuration
Leuze electronic
DCR 202i
37
The IP address of the code reader can now be changed to the desired IP address.
Setting the IP address with the DCR Configurator
With the DCR Configurator smartphone app, you can set the IP address of the code reader without a PC.
Download the DCR Configurator smartphone app from the Internet.
• Call up the Leuze home page: www.leuze.com.
• Enter the type designation or part number of the device as the search term.
• The DCR Configurator smartphone app can be found on the product page for the device on the
Downloads
tab.
Open the DCR Configurator smartphone app.
Select the Assign IP address configuration menu item and enter the desired IP address.
The DCR Configurator generates a configuration code for changing the IP address to the desired value.
The configuration code is displayed on the smartphone.
Connect the code reader to the voltage supply and select the
AUTO
function on the control panel.
Hold the configuration code generated by the DCR Configurator at the correct distance in front of the
optics of the code reader.
• The code reader adjusts the illumination and reads the configuration code.
• The code reader changes the device configuration and saves the new configuration.
8.3.2 Automatically setting the IP address
Set the IP address automatically if a DHCP server assigns the IP addresses in the system.
Select the option to obtain the IP address automatically in the webConfig tool:
Configuration > Control > Ethernet DCR > DHCP
Use the configuration code to obtain the IP address automatically (see chapter 17.3 "Configuration via
8.3.3 Address Link Label
The Address Link Label is an additional stick-on label that is affixed to the device.
Figure 8.1: Example of an Address Link Label ; the device type varies depending on the series
• The Address Link Label contains the MAC address (Media Access Control address) of the device
and makes it possible to enter the IP address and the device name manually.
The area of the Address Link Label on which the MAC address is printed can be separated from the
remainder of the stick-on label if necessary using the perforation.
• The Address Link Label can be removed from the device and affixed in the installation and layout
diagrams to designate the device.
• Once it is affixed in the documents, the Address Link Label establishes a unique reference between
the mounting location, the MAC address or the device, and the associated control program.
There is no need for time-consuming searching, reading, and manually writing down of the MAC
addresses of every device that is installed in the system.
IP
00:15:7B:20:00:15
DCR 202i MAC
Name
