Leuze electronic CSL710-R05-1280.A/L-M12, Original Operating Instructions, Page: 11 / 98

Device description
Leuze electronic CSL 710 11
Up to four digital inputs/outputs (configurable)
• Blanking of unnecessary beams
• Smoothing for interference suppression
• Block evaluation of beam areas
3.3 Connection technology
The transmitter and receiver feature an M12 connector with the following number of pins:
3.4 Display elements
The display elements show the device status in operation and provide support during commissioning and
error analysis.
Located on the receiver is a control panel with the following display elements:
• two LEDs
• one OLED display (Organic Light-Emitting Diode), two-line
Located on the transmitter is the following display element:
• one LED
3.4.1 Operation indicators on the receiver control panel
Two function indicator LEDs are located on the receiver control panel.
1 LED1, green
2 LED2, yellow
Figure 3.2: LED indicators on the receiver
Table 3.1: Meaning of the LEDs on the receiver
Device type Designation on device Plug/socket
Receiver X1 M12 plug, 8-pin
Receiver X2 M12 socket, 5-pin
Transmitter X3 M12 plug, 5-pin
1
2
LED Color State Description
1 Green ON (continuous
light)
Light curtain ready (normal mode)
Flashing see chapter 12.2
OFF Sensor not ready
2 Yellow ON (continuous
light)
All active beams free – with function reserve or configured as trig
-
ger slave without trigger pulses
Flashing see chapter 12.2
OFF At least one beam interrupted (object detected)