manualshive.com logo in svg

Leuze electronic BCL548i, Manual

Share
Download
Leuze electronic BCL548i Manual Download Page 26

Device description

24

BCL 548

i

Leuze electronic

4

Device description

4.1

About the bar code readers of the BCL 500

i

 series

Bar code readers of the BCL 500

i

 series are high-speed scanners with integrated decoder

for all commonly used bar codes, e.g. 2/5 Interleaved, Code 39, Code 128, EAN 8/13 etc.,
as well as codes from the GS1 DataBar family.

Bar code readers of the BCL 500

i

 series are available in various optics models as well as

line scanners, line scanners with deflection mirrors, oscillating mirrors and also optionally
as heated models.

Figure 4.1:

Line scanner, line scanner with deflection mirror and oscillating-mirror scanner

The extensive options for device configuration via display or software enable adaptation to
a multitude of reading tasks. Due to the large reading distance combined with the great
depth of field and a very compact construction, the device is ideally suited for package and
pallet transportation systems. In general, the bar code readers of the BCL 500

i

 series are

designed for the conveyor and storage technology market.

The interfaces (

RS 232

, 

RS 485

 and 

RS 422

) integrated in the various device models and

the fieldbus systems (

PROFIBUS DP

, 

PROFINET-IO

 and 

Ethernet

) of the bar code readers

of the BCL 500

i

 series offer optimum connection to the superior host system.

Line scanner

Oscillating-mirror scanner /

Line scanner with deflection mirror

Summary of Contents for BCL548i





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands