manualshive.com logo in svg

Leuze electronic AMS 308i, Technical Description, Page: 49 / 79

Share
Download
Leuze electronic AMS 308i Technical Description Download Page 49

Display and control panel AMS 308i

46

AMS 308

i

Leuze electronic

8.3

Menu description

8.3.1

The main menus

After voltage has been applied to the laser, device information is displayed for several
seconds. The display then shows the measurement window with all status information.

 

AMS 308i 120
Leuze electronic

GmbH & Co. KG

SW: V 1.3.0

HW:1

SN: ---------------

Device information - main menu

This menu item contains detailed information on
• Device model,
• Manufacturer,
• Software and hardware version,
• Serial number.
No entries can be made via the display.

Network information
Address:

---.---.---.---

Net mask:

---.---.---.---

Gateway:

---.---.---.---

MAC ID:

--.--.--.--.--.--

Network information - main menu

• Display of the network settings.
No entries can be made via the display.

IO1

LSR

PLB

LNK0

IO2 TMP

ATT

LNK1

ERR

+ 87.000m

Status and measurement data - main menu

• Display of status-, warning-, and error messages
• Status overview of the switching inputs/outputs.
• Bar graph for the reception level.
• Link.
• Measurement value.
No entries can be made via the display.
See "Indicators in the display" on page 41.

Parameter

Parameter handling
Ethernet
Maximum position value
I/O
Other

Parameter - main menu

• Configuration of the AMS.
See "Parameter menu" on page 47.

Summary of Contents for AMS 308i
















































































Reviews:

No comments