manualshive.com logo in svg

Leuze electronic AMS 308i, Technical Description, Page: 28 / 79

Share
Download
Leuze electronic AMS 308i Technical Description Download Page 28

Installation and mounting

Leuze electronic

AMS 308

i

25

TNT

 35/7-2

4

V

5.3

Mounting the AMS 308

i

 with laser beam deflector unit

General information

The two available deflector units are used for the 90° deflection of the laser beam, 
see "Accessory deflector unit" on page 68.

Attention!

The deflector units are designed for a maximum range of 40m. 
Longer distances on request.

5.3.1

Mounting the laser beam deflector unit With integrated mounting bracket

The AMS 308

i

 is screwed onto the mechanism of the US AMS 01 deflector unit. The mirror

can be mounted for three deflection directions:

1.

Upward beam deflection

2.

Beam deflection to the left

3.

Beam deflection to the right

The deflector unit is mounted on plane-parallel, flat walls or plant components. For error-
free position measurement, there must be an interruption-free line-of-sight between the
AMS 308

i

… and the deflection mirror as well as between the mirror and the reflector.

Use the M5 screws to mount the deflector unit. Secure the screws with a toothed lock
washer to protect against loosening caused by vibrations.

Figure 5.5:

Mounting variants of the US AMS 01 laser beam deflector unit

Summary of Contents for AMS 308i
















































































Reviews:

No comments