Device parameters and interfaces
Leuze electronic
AMS 200
85
TNT
3
5/7-2
4
V
8
.
3
Interbus
8
.
3
.1
General information
The AMS 200/xxx
-20
-(H) is designed as an Interbus device. The functionality of the
AMS 200 is thereby permanently defined by default settings.
The baud rate of the data to be transferred is 500 kbit/s.
The RS 2
3
2 interface available on the AMS 200 can be used simultaneously with the
Interbus interface. The SSI interface cannot be used.
8
.
3
.2
Activation/deactivation of the Interbus interface on the AMS 200
Notice
!
The Interbus interface can be activated/deactivated via the display. With the Interbus acti-
vated, the
IBS
lettering is visible on the display. By default the Interbus interface is activated
and the RS 2
3
2 interface is deactivated.
If Interbus "
OFF
" is switched, the
IBS
lettering is also deactivated on the display.
Continuing participants are addressed even with the Interbus deactivated.
A deactivated AMS 200 can be recognised on the process data monitor of the Interbus
master by means of the data double word 80 00 00 00
H
.
Figure 8.11: Interbus activation
E
S
C
E
S
C
Measurement window with activated Interbus and RS 2
3
2 interface:
Display
IBS
:
Interbus activated (
default: ON
)
Default: ON
Display
RS2
3
2
: RS 2
3
2 interface activated
(
default: OFF
)
Summary of Contents for AMS 200
Page 117: ......