Leuze electronic AMS 200, Technical Description, Page: 19 / 118

Specifications
Leuze electronic AMS 200 15
TNT
3
5/7-2
4
V
4. 3 Electrical connection
The AMS 200… is connected using M 12 connectors.
For the locations of the individual device connections please refer to the device detail shown
below.
The corresponding mating connectors and ready-made cables are available as accessories
for all connections (see chapter 10 "Type overview and accessories").
Attention !
Connection of the device and maintenance work while under voltage must only be carried
out by a qualified electrician.
If faults cannot be cleared, the device should be switched off from operation and protected
against accidental use.
Before connecting the device please ensure that the supply voltage matches the value print-
ed on the nameplate.
The AMS 200… is designed in accordance with safety class III for supply with PELV (pro-
tective extra-low voltage with reliable disconnection). For UL applications use is permitted
solely in Class 2 circuits according to NEC (National Electrical Code).
Please ensure that the protective conductor is connected correctly. Trouble-free operation
is only guaranteed if the device is properly earthed.
Figure 4. 3 : Location and designation of the electrical plug connections
Attention !
Protection class IP 65 is achieved only if the connectors and caps are screwed into place!