Leuze electronic
CMS 700i
– Contour Measurement System
Page 7
2 Safety
The contour measurement system CMS 700i and its components were developed manufactured and
tested in line with the applicable safety standards. It corresponds to the state of the art.
2.1 Intended use
The device is designed as a measuring and object-detecting, configurable, multi-sensor unit.
Areas of application
The contour measurement system is designed for the measurement and detection of objects for the
following areas of application in handling and warehousing systems, the packaging industry or a
comparable environment:
Dimensional measurement of parameters like length, width and height
Rotation angle of objects on conveyors
Contour measurement
CAUTION
Observe intended use!
Only operate the device in accordance with its intended use.
The protection of personnel and the device cannot be guaranteed if the device is operated in
a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by improper use.
Read the original operating instructions before commissioning the device. Knowledge of
the original operating instructions is an element of proper use.
NOTICE
Comply with conditions and regulations!
Observe the locally applicable legal regulations and the rules of the employer’s liability
insurance association.
2.2 Foreseeable misuse
Any
use other than that defined under „Intended use“ or which goes beyond that use is considered
improper use.
In particular, use of the device is not permitted in the following cases:
Rooms with explosive atmospheres
Circuits relevant to safety
Operation for medical purposes
NOTICE
Do not modify or otherwise interfere with the device!
Do not carry out modifications or otherwise interfere with the device.
The device must not be tampered with and must not be changed in any way.
The device must not be opened. There are no user-serviceable parts inside. Repairs must only
be performed by Leuze electronic GmbH + Co. KG.