Let's Go Aero WingMan BVK093 User Manual Download Page 1

User Manual

Description

Qty

WingMan Base

1

Hat Brackets

2

Carriage Bolts & Hard-

ware sets 

4

Wing with Pads

2

Wire Lock Pin

2

Double Toggles

4

Wheel Cradle Assembly
    Wheel Cradle 

4

    Toggle Balls

4

    Hair Pin Clip

4

Parts List

  Assembly

Locate the WingMan base, the two Hat brackets and the four 

5/16” carriage bolts, washers and locking nuts.

Position the WingMan base on the top surface of the tubing 

mount and attach the two Hat brackets around the tubing and 

onto the bottom of the WingMan base with the locking nuts and 

washers.

Tighten the four bolt/nut combinations so that even amounts 

of bolt thread appear below each of the locking nuts, as the 

Hat Bracket compresses the WingMan base plate against the 

top surface of the tubing.  Tighten the nuts until the tabs on the 

Hat bracket start to defect, or until 12 foot pounds of torque is 

achieved.

Step 1: Attachment of WingMan Base Plate to 2” Square 

Tube Surfaces

Wing with 

Pads

Wheel Cradle 

Assembly

Double 

Toggles

WARNING

Periodically check the carriage bolt tension in the event any 

loosening has occurred.

WingMan™ 2-Bike Carrier

Wire Lock Pins

Hat Brackets

Part No. BVK093

U.S. Patent No: D684917

BVK093 090815

Reviews: