Page 1 of 4
Copyright
©
2019, Lets Go Aero, Inc., All rights reserved.
B01175-062019rev
Accessory 2-Bike Expansion Kit for V-Lectric Bicycle Carrier (P/N B01892 sold separately).
Rated for 150 lbs (75 lbs per bicycle).
V-Lectric Expansion Kit
2-Bike Accessory Add-on (for V-Lectric Bicycle Carrier)
Part No. B01175
1
4
8
8
8
4
4
8
2
8
8
2
BASE
HAT BRACKETS
5/16” X 1” CARRIAGE BOLTS
5/16” WASHERS
5/16” NYLOCK NUTS
UPPER WHEEL CRADLE
LOWER WHEEL CRADLE
RUBBER STRAP
WING
CRADLE HOUSING
RETAINER CLIP
WIRE LOCK PIN
PARTS
QTY. DESCRIPTION
NOTICE:
All Manual information is subject to change without notice. Revised editions
will be available for free download at LetsGoAero.com. Manual information is considered
factual until made obsolete by a revised version.
Follow this QR-Code or visit
LetsGoAero.com/manuals to check for an updated version:
N
P
Q
U
V
W
X
Y
Z
AA
BB
CC
STEP 1
: Preparation
Loosen the Hat Brackets
[P]
of the Base
[N]
already installed on
your pre-owned V-Lectric Carrier.
Slide the Base
[N]
back towards the vehicle and out of the way.
Leave these connections loose at this time.
NOTE:
This V-Lectric Expansion Kit add-on MUST position furthest
away from vehicle. The Safety Cable located on the Base included
with your original V-Lectric Carrier
[N] MUST
be positioned closest
to the vehicle.
NOTE:
This manual assumes you
have already assembled your pre-
owned V-Lectric Bicycle Carrier.
[Fg.1]
Revision Date: 06/20/19
N
P
