Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
address
，
if it is point-to-point call
，
then input the opposite terminal's IP address, it can also be
set as domain name and resolved the specific IP address by DNS server of the phone. If no
configuration has been made, then the IP will be considered as 0.0.0.0. This is an optional
configuration item
；
Configure the other
party's protocol signal
port, this is optional configuration item
：
when nothing is input,then the default of h323 protocol
is 1720
，
the default of sip protocol is 5060
；
lifeline required no configuration of this item,
shown as 0
；
Configure alias
，
this
is
optional
configuration item
：
it is the number to be used when the other party's number has prefix
；
when
no configuration has been made, shown as no alias
；
Configure
suffix
，
this is
optional configuration item
：
it is the additive dial-out number behind the number; when no
configuration has been made, shown as no suffix
；
Configure the replacing
length, replace the
number that user input according to this length
；
this is optional configuration item
；
Of which the alias can be divided into four types
，
it should be combined with replacing length to
make the setup
：
Add
：
xxx
，
add xxx before number. in this way it can help user save the dialing length
；
All
：
xxx
，
the number is all replaced by xxx
；
speed dialing can be implemented
，
for example,
user configure the dialing number as 1, with the configuration "all" , the actual calling number
will be replaced;
Del
，
delete n bit in the front part of the number,n can be decided by the replacing length
；
this
configuration can decide the protocol for appointed number
；
Rep
：
xxx
，
n bit in the front part of the number will be replaced. n is decided by the replacing
length. For example, user want to dial PSTN
（
010
－
62281493
）
by VoIP's voice over
service
，
while actually the called number should be 8610
－
62281493
，
then we can configure
called number as 010T,then rep
：
8610
，
and then set the replacing leangth as 3. So that when
user make a call with 010 prefix,the number will be replaced as 8610 plus the number and then
sent out. It is a convenient thinking mode for user to make a call;
Delete selective number IP image
；
If user want to modify a certain
current number image
，
first
select in the drop-down menu and then load the image parameter of the said number, click modify
to make modification
；
of which
：
this is the modified number. read-
only
；
To modify call mode
；
To modify destination
address
；
this is
28
