www.lesscare.com
LH1-36G & LH2-30G
WALL MOUNT RANGE HOODS
INSTALLATION INSTRUCTIONS
8
INSTALL SAFETY CLIPS
EXTEND AND SECURE CHIMNEY
After mounting the range, safety clips must be
installed to help avoid the range hood
accidentally slide up and fall from the wall.
1. Place both safety clips in the designated
locations inside of the chimney.
2. Use the safety clips as a template and mark
holes for drilling using a pencil or marker.
3. Drill two holes (one for each safety clip) and
insert two wall anchors. Attach safety clips to the
drilled holes and secure both safety clips by
screwing in two M5x50mm screws into the
anchors through the pre-drilled holes on the clips.
See Figure 8
Remove protection film al protection film from
the Chimney Extension. Insert Chimney
Extension in the Base Chimney through the top of
the hood using designated space.
Extend Chimney Extension to neccessary height
(7'-8' from the hood.) Secure Chimney Extension
by fastening it to the wall with two M4x12mm
screws
See Figure 9
Figure 8
Figure 9
1
2
M4x12mm
