Tools required:
Phillips screwdriver, Allen wrench (included in hardware pack).
Note:
These instructions are intended for various shapes, models and configurations.
Your product may not look exactly as shown in the diagrams.
Recommendation:
Retighten all screws and bolts on a seasonal basis to ensure
your product remains strong and stable for many years of use.
Weight Capacity:
These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
55 Peters Road
Bloomfield, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
1. Unpack and identify all parts.
2. Place the tabletop upside down on a soft, clean
surface to prevent scratches.
3. Attach one leg to tabletop using 1” Allen
bolts and washers into threaded inserts, as
shown in figure 1. Be sure leg angles out and
short connecting post is parallel to tabletop
reinforcing plate. Keep bolts slightly loose for
now.
4. Connect cross tube to connecting post on first
leg using ½” Allen bolt, as shown in figure 2. Be
sure the 2 connecting posts on cross tube face
the center of table. Keep bolt slightly loose for
now.
5. Connect second leg to cross tube and tabletop,
and also connect third leg to tabletop, as shown
in figure 3. Keep all bolts slightly loose for now.
© 2011 Lesro Industries, Inc.
March 2011
Assembly Instructions
For 84” & 96” Steel Frame Conference Tables
(Rectangular and Elliptical models 84” and 96” long)
Parts List
Tabletop
Legs, 4 pcs.
Cross Tubes, 2 pcs.
Center ‘H’ Frame
Shelf
Figure 1
Hardware Pack
1” Allen Bolts, 20 pcs.
Washers, 20 pcs.
½” Allen Bolts, 8 pcs.
Allen Wrench
¾” Shelf Screws
Connecting
Post
Reinforcing
Plate
Figure 2
Figure 3
Cross
Tube
‘I’ Beams
Leg
angles
out
Second
Leg
Third
Leg
Connecting
Posts