LST-WP1
EN
Positioning Before Welding
Limit Groove Plate Of Guide Wheel
Handle Of
Guide Wheel
Fixed Plate Of Guide Wheel
Lower Film
Guide Wheel
upper
membrane edge
Upper Film
1.Depress handle to lift machine, move it to welding position (the edge of upper
film should keep in the same alignment with drive roller), as shown in figure 4.
2.Lift guide bar to make front wheel (left) off the ground，slide handle of guide
wheel to right side until the right position of limit groove plate of guide wheel,
to keep the guide wheel in the same alignment with the edge of upper film.
