Lepu Medical AIView 12V, Operator'S Manual, Page: 50 / 292

3-15

Note
To make the language change valid, please restart the monitor.
3.10.2 Setting the Date and Time
To set the system date and time, follow the steps below:
1. Press [Main Menu]
→
[System]
→
[System].
2. Set [Date Format]. Options: YYYY-MM-DD, DD-MM-YYYY,
MM-DD-YYYY.
3. Set [Time Mode]. Options: 12 hours, 24 hours.
4. Set the current [Date] and [Time].
Warning
Changing the date and time affects the storage of trends and events and
may result in loss of data.

Note
If the monitor is connected to a central monitoring system (CMS) or
hospital Information system (HIS), the date and time are automatically
taken from the CMS. In this case, you cannot change the date and time on
the monitor.
3.10.3 Enabling Daylight Saving Time
The daylight saving time is disabled by default. You need to manually
enable the daylight saving time. To do so, follow the steps below:
1. Press[Main Menu]
→
[Maintenance]
→
input password
→
press [Enter].
2. Select the [Time] tab.
3. Switch on [Summer Time].
4. Adjust daylight saving time settings as necessary.
3.10.4 Adjusting the Screen Brightness
To adjust the screen brightness, follow the steps below:
1. Press [Main Menu]
→
[System]
→
[System] to enter the system
setup screen.
2. Drag the slider to set the [Brightness].
Its setting range is ―1~10‖, gradually brightened.
3.10.5 Adjusting the Volume
To adjust the keystroke sound and the touch-screen sound, the
alarm volume and the beat volume, follow the steps below: