Lepu Medical AIView 12V, Operator'S Manual, Page: 253 / 292

A-5
2 TEMP connectors
2 IBP connectors
1 CO
2
connector
Thermal
recorder Thermal dot matrix recorder
Horizontal resolution: 8 dot/mm
Vertical resolution: 8 dot/mm
Recording paper width: 50 mm
±
1 mm
Paper speed: 25 mm/s, 50 mm/s, error
≤±
5%
A.5 Signal Outputs Specifications
Auxiliary output
Standard Meets the requirements of IEC 60601-1 for
short-circuit protection and leakage current
ECG analog output
Bandwidth
(-3dB; reference
frequency: 10Hz)
0.5 Hz ~ 40 Hz
QRS delay < 25ms(non-paced)
Output sensitivity 0.4 V/mV5%
Baseline level
2.20
±
0.2 V
Output impedance ≤
100
Ω
Duration of
short-circuit Short circuit to ground for 1 minute, no fault after
disconnection.
Defibrillation synchronization signal output
Output impedance ≤
100
Ω
Maximum time
delay 30 ms
Amplitude High level: 3.5 V to 5 V, providing a maximum of 10
mA output current;
Low level: < 0.5 V, receiving a maximum of 5 mA
input current.
Pulse width
100 ms
±
10%