Lepu Medical AIView 12V, Operator'S Manual

Page: 171 / 292

16-5
In the ST review screen, you can perform the following operations:

In the pop-up menu of [Trend Group], select ST lead and HR.

Select [Zoom] to set the length of data displayed on the current
screen. Options: 8min, 30min, 1h, 2h, 4h, 8h, 12h, 24h, 48h.
 Select [Detail] to view the ST segment details of the current
time.
In the ST segment details screen, you can perform the following
operations:

View the anterior (V1-V4), inferior (II, III, aVF, aVR) and lateral (I,
aVL, V5, V6) ST segments.

Select [Save Ref.] to save the currently displayed ST segment
as the ST reference. The save is temporary and lost after the
monitor is switched off or discharging the patient.

Select [Display Ref.] or [Hide Ref.] to display or hide ST
reference. When [Display Ref.] is selected, the current ST
segment and ST reference are displayed in the waveform area,
and the ST reference time is displayed on the bottom of the
waveform area.

Select [Display Marker] or [Hide Marker] to display or hide
markers.

Select [Trends] to return to the trend chart screen.
 To print ST data, select [ ] or [ ] icon.
16.8 OxyCRG Review
The OxyCRG screen displays the trend curves of HR, SpO
2
, Resp,
RR and EtCO
2
. HR and SpO
2
are displayed by default, other
parameters are configurable.
16.8.1 Entering the OxyCRG Screen
Enter the [OxyCRG] screen in either of the following ways:

Press the [OxyCRG] quick key.

Press the [Screens] quick key
→
select [OxyCRG].
 Press [Main Menu]
→
[Screens], select [OxyCRG].
In the OxyCRG screen, you can perform the following operations:

Select the length of data displayed on the current screen from
the Zoom popup list.

Options: 1min, 2min, 4min, 8min. The default is 2min.

Select the parameter label in the parameter pop-up list.