background image

7

CARE AND MAINTENANCE

Use only a soft and dry cloth to clean the clock. Dust and 
particles contained in the cloth could scratch parts. Do not 
use any kind of cleaning products to wipe the clock (except 
for the caterpillar tracks). It is recommended to keep the 
clock distant from any source of heat or vibrations. To pre-
serve the longevity and functionality of Sherman, do not 
permanently expose the clock to direct sunlight or in a 
humid or dusty place.

Our clocks are developed to ensure optimal accuracy and 
reliability. It is well accepted for a fine mechanical clock to 
have a few seconds’ variation per day and our clocks are set 
so as not to delay. However if you should notice a bigger 
variation, please contact an authorized dealer who will 
advise you, or a L’Epée 1839 technical support center which 
will proceed with the necessary adjustment.

As for all Horological pieces of art, it is recommended to 
periodically service your clock. A mechanical masterpiece 
requires fine oils for the lubrication of the movement. 
These oils deteriorate over the years. We therefore advise 
having the movement serviced every 3 to 5 years. Be aware 
that the optimal period between servicing times can vary 
depending on the surrounding environmental conditions.

It is recommended not to hold Sherman only by the helmet 
or the arms.

Do not roll Sherman too quickly forward or backward, which 
could result in the caterpillar tracks disengaging from the 
rollers.

Summary of Contents for SHERMAN













Reviews: