Page 1 of 4
© 2021 Leotek Electronics USA LLC. SAFEGUARD_Installation Guide_11-1-2021
Step 3 -
Loosen the slip-fitter bracket bolts and insert the mounting arm. The
maximum outside diameter for the mounting arm is 2-3/8” (60.3mm). The
minimum outside diameter for the mounting arm is 1-5/8” (41.28mm).
Mounting arm to be placed “stopped” against appropriate step required
to achieve desired degree of tilt. Steps vary from from 0
o
to 2.5
o
.
This procedure is designed as an installation aid. Skilled tradespeople that are familiar with general construction and electrical installation
techniques should perform the installation. Licensed electricians should provide electrical installation connections. Installations and
connections should be done in accordance with all national and local codes and permits. In no way is this document intended to construe
warranty or fitness of use of the products described, nor is it intended to provide safety instruction for those installing the product.
WARNING
Before proceeding with installation or service maintenance of this product:
• Disconnect power to reduce electrical shock risk.
• Review the entire Installation Guide.
• Inspect this properly packaged product for any damage that may have occurred during transit.
• Verify product application complies with manufacturer design recommendations.
• Verify the availability of necessary tools and incidental material.
• Verify applicable code requirements. Field assembly and installation are subject to acceptance by local inspection authority.
• Appropriate safety equipment to be determined by end user, per applicable safety standards and precautions.
Safeguard
TM
UTL Utility Light Installation Guide
Step 1 -
Pull forward on the retaining clip to unfasten the door latch.
Luminaire Installation
Step 2 -
Lift the door and pull it open to access internal components.
Complete product documentation
available online at:
https://leotek.com/lighting-library/
Information provided subject to change without notice.
Leotek Electronics USA LLC | 1955 Lundy Avenue | San Jose, CA 95131
408.380.1788 | www.leotek.com