HARDWARE INSTALLATION
Installation Steps
This section will explain how to install GINJ-0201-EBT Series.
Installation Steps
Step 1.
Unpack the industrial injector from the original packing box.
Step 2.
Check if the DIN-Rail bracket is screwed on the industrial injector.
•
If the DIN-Rail is not screwed on the industrial injector, please refer to the
DIN-Rail Mounting
section
for DIN-Rail installation.
•
If you want to wall mount the industrial injector, please refer to the
Wall Mounting
section for wall
mounting installation.
Step 3.
To hang the industrial injector on a DIN-Rail or wall, please refer to the
Mounting Installation
section.
Step 4.
Power on the industrial injector and then the power LED light will turn on.
•
If you need help on how to wire power, please refer to the
Wiring the Power Inputs
section.
•
Please refer to the
LED Indicators
section for LED light indication.
Step 5.
Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.
Step 6.
Insert one side of the RJ-45 cable into injector
’s Ethernet port and on the other side into the
networking device’s Ethernet port, e.g. switch
, PC or server.
•
Please refer to the
LED Indicators
section for LED light indication.
Step 7.
When all connections are set and the LED lights all show normal, the installation is complete.
Summary of Contents for GINJ-0201-EBT-T
Page 1: ...GINJ 0201 EBT T...
